Is it this one I'm pointing to?
If so it's tied up with zip ties and looks a right bugger to get out
Think I should just stick to the 560
Yes, as Tech says.
Just to add you should have two from the psu, according to the specs of your psu they are 6 2 which means you just need to clip them together to form the eight pin and then insert into the card.
Look at the photos I attached prior to your post. It looks a night mare to take them out of the zip ties
Sorry didn’t see the photos before I posted last time.Yes that’s the one and you will need to get/route it to the card.
There should be two so is the other easier to get to or is it on the same bundle.If you can cut the top zip tie it might give you a bit more to play with
Nope if tried and it won't go
Think I'll stick to the 560
As Chuck has said just cut the ties, they are only there to tidy up the bunches as they break out of the PSU.
But the 560 is no upgrade
Get one of these and do yourself a favour.
IPOTCH 18AWG 8 Pin to 8 (6 2) Pin Power Supply Cable for CPU Splitter PCI-E Graphics Card,Power Extension Cable 8 Pin CPU molex,GPU Mining ZEC Ethreum: Amazon.co.uk: Computers & Accessories
look around for the cheapest price.
Alternatively, does the other side of the case come off, it looks like it does from the photos?
They must have got them in there somehow and I doubt they were zipped tie in situ as per the photo.So you should be either able to pull them out through the hole or take the side off to allow easy access.
OK done it these are the cables right?