Stuck in USB port - Smart Phone Flash Tool

techquest

I will help anyone but the issue here is I'm not sure what your trying to achieve.

1. You tried flashing your phone. Why, did it have some kind of a problem?

2. In trying to flash it you bricked it.

2. Do you have the right rom file and facility to try and undo your earlier bricking of the phone?

4. It could be that it is unrecoverable but unless we know you are using the correct files, methods etc then it is probably wasting your time and effort.

007fred52

1. why i flashed was before 4G does not work.
2. yes
3. No i does not have the right ROM

The other case is trash the phone.

techquest

Error OXFC0

Message: BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)

Meaning: The firmware you're trying to flash is either not compatible with your device or you have selected the wrong flashing settings

Solution:
Ensure that the file(s) you're trying to flash are actually for your exact phone modelEnsure you tick the boxes for only the files present in the ROM you're about to flashProbably have the wrong driver installed. Uninstall vcom,  preloader and MTK drivers using usb deview then manually re-install using  How to install Mediatek USB VCOM driversDelete the sp flash tool folder then re-extractEnsure the phone is switched off (with battery still inside) before connecting to PC for flashing.If that doesn't work, keep  holding  down the volume decrease button just before connecting the phone to PC for flashing (you could try volume increase , power   volume decrease or power   volume increase).Consider using the latest version of Sp Flash toolFormat the phone before trying to flash the file(s) again

007fred52

i got this 2 error at same time.
BROM ERROR S_FT_ENABLE_DRAM_FAIL (OXFC0)  and brom error s_storage_not_match

007fred52

it's a jungle for the phone to work again.

techquest

Yes without the correct stuff it's always going to be a jungle as you put it.

007fred52

right now i have the same problem as                                
but nothing happen of the 3 steps:
1. Format all   Download
2. Firmware Upgrade
3. Download Only

techquest

So now your picture is showing MT6580

or is this from an online screenshot?

007fred52

the video are for the online not mine.

techquest

okay thanks for the confirmation