Author: davidegee

E Cigarettes

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
26-11-2019 20:35:09 Mobile | Show all posts
Cut two pieces of wick lay one half way down the other and coil here round both wicks only 3 or 4 wraps then you should have 3 legs put each one down the holes.  If your burning through the wick coil may be too tight.

You can cheat and wrap a coil round a 2.5mm drill bit then feed the wick through that using a single piece of 3mm

You can also double the wick over coil round both then snip the top one short and have 2 legs on the other wick. Its easier to coil round a fatter wick
Reply Support Not support

Use magic Report

26-11-2019 20:35:10 Mobile | Show all posts
If your in the market for a gayfun 3.1 you better get a move on

SvoeMesto - Cloud 9 Vaping
Reply Support Not support

Use magic Report

26-11-2019 20:35:11 Mobile | Show all posts
Thanks for posting that DR Kronenburg. I never know when these kind of things come and go.

Quality piece of kit. I almost went for one and even at £124.90(del) I had to slap my face a few times to stop myself panic buying.
Reply Support Not support

Use magic Report

26-11-2019 20:35:12 Mobile | Show all posts
As Rapids Johnson would say "keep em peeled"
Reply Support Not support

Use magic Report

26-11-2019 20:35:13 Mobile | Show all posts
That is why I don't follow those threads as I'll end up panic buying stuff.

I would snap their arm off if it was half that price.

How long does a wick last in those Kayfuns?

Hopefully the tech will be ripped off and mass produced.
Reply Support Not support

Use magic Report

26-11-2019 20:35:14 Mobile | Show all posts
Oh you'd need to ask JDCFH on that one, I don't own one because I think they're fugly shallow I know but it needs to look good also and I just can't see past the look of it, it is remarkably popular though

Kayfun 3.1 - worth the hype?
Reply Support Not support

Use magic Report

26-11-2019 20:35:15 Mobile | Show all posts
I'm looking for an easy rebuildable using silca and wire. Needs a good size tank on it because as I chain vape. Needs to be easy fill - meaning no fiddly screw to remove everytime I want to fill it.
Reply Support Not support

Use magic Report

26-11-2019 20:35:16 Mobile | Show all posts
You just missed out on the new Loki Tanks this morning, no screws just twist the cap and fill.

Loki Tank

You can put these inside, I have two of them and they are great and easy to rebuild, unfortunately out of stock too.

The Killer

I know it doesn't help you now but it is a good combination and looks good on any 22mm mod, you can of course buy thinner tanks for thinner mods.
Reply Support Not support

Use magic Report

26-11-2019 20:35:17 Mobile | Show all posts
Batch 4 of this mod goes on sale at 16:00 tonight, going to see if I can bag myself one.

GP PAPS 18350 LUX Edition version 2.5 | vapourart.com
Reply Support Not support

Use magic Report

26-11-2019 20:35:18 Mobile | Show all posts
Thanks. They look good.

Probably best they are out of stock too.  
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部