|
Hi,
While I wait the endless wait for Tado support to reply to my query I wondered if any of you had seen any of the following;
- The Link LED on the bridge constantly flashes. The FAQ seems to suggest this is not correct and that it's still in pairing mode, however I don't seem to have any issues with the connection between the bridge and my two thermostats. Can anyone confirm that their Link LED is solid?
- The current temperature in the app (iOS) on the 'main' screen is often different to the current temp that the graph page is reporting.
- The reported temperature often reaches a degree or two higher than the target temp with the heating still being 'on' (flame icon), however...
- The appearance of the 'flame icon' (heating on) seems to bare absolutely no relation to whether the boiler is fired up. I wonder if the boiler is also applying some logic to the situation so that the thermostat requesting heating does not necessarily mean the boiler fires up. They seem to disagree an awful lot of the time. For instance yesterday, the house felt cold, the reported temp was a degree below the target temp, the fame icon was present but the boiler was doing nothing.
- The graph page shows that an awful lot of the time the temperature is constant, not varying by even 0.1 of a degree with the heating switching on and off (whether it actually is is a different matter though). I simply don't believe that the temp in the house is not altering at all for hours at a time. It would be wonderful if true but how the house actually feels does not corroborate the reading.
In spite of all of that, most of the time the tado actually seems to be doing quite a reasonable job of controlling the temp. It's just that the conflicting readouts and heating status gives me very little confidence in the system. I wondered if that reflected other people's experience? |
|