sorry to tell, still the same error, (2005)
what i can do is wait for the battery is dead or case just bricked. and useless
Do you have a screen shot of what windows error is saying?
i got this error here
Have you tried getting the phone into recovery mode. Not sure which button but try switching on and holding one of the buttons on the phone at the same times as powering it up. Or even a combination of two buttons.
yes, power volume up
okay. Looking to see if there is anything else you can use other than SP Flash.
I wait today, now it works !
but will you help me to find a fimware to flash it?
now i got new error: 4001
SP flash tool is having difficulty communicating with the device
I have taken a good look around for firmware for your phone but sadly there does not seem to be anywhere to get new firmware. It is the way such manufacturers do things, they sell you a phone and then walk away.
I will continue to search but think it will not be possible.
There really isn't much information to be found.
Error 4001
Message: S_FT_DA_NO_RESPONSE or Da didn't send response data to FlashTool!
Meaning: SP flash tool is having difficulty communicating with the device
Solution:
Change the USB-portRun SP flash tool as AdminEnsure to install the correct drivers (see How to install Mediatek USB VCOM drivers )Try another PC and USB cordEnsure the phone is switched off with a charged battery inside when connecting to the PC for flashing