View: 559|Reply: 5

Do you know what this is - small panel on wall in corner of room?

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
1-12-2019 21:24:30 Mobile | Show all posts |Read mode
Hi all

Can anyone tell me what this panel is for please - apologies for the quality of the photo!)? I have them in the corner close to the ceiling of a number of rooms.



Also, in the understairs cupboard, this panel is hidden behind a cover; I assume they are somehow connected but there's no documentation/instructions anywhere and I can't tell if there's even power to this panel.



Thanks in advance
Reply

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
1-12-2019 21:24:31 Mobile | Show all posts
The small panels likely cover cables that has been joined. Probably TV or telephone cable, but It could be electrical cable, so open with caution, and make sure you use an electrically insulated screwdriver when removing the screws.

Regards,
James.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
1-12-2019 21:24:32 Mobile | Show all posts
The small plate is just a standard architrave switch blanking plate from the looks of it. A architrave switch is Approximately 90mm by 30mm.

Looks like the blanking plate was just used to cover up either cables installed for future use or possibly to cover up where something has been removed.

Do you have an alarm? There's one mentioned on the labelling in the second picture, if you do t I'd suggest the blanking plate in the corner of the room is covering up where a PIR sensor was previously mounted.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
 Author| 1-12-2019 21:24:33 Mobile | Show all posts
Thanks for the replies. I don't have an alarm but I guess the previous occupants may have.

I did wonder about the possibility of them being junction boxes, PIR's, etc, but couldn't find anywhere that explained it well enough to be sure.

As I'm not planning on having an alarm or doing any wiring, etc. I'll continue to ignore them!

Thanks again
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
1-12-2019 21:24:33 Mobile | Show all posts
These were common in new build properties where the builder (or normally electrician) ran alarm cables so just put a blanking plate to hide the cable, then then used to offer an alarm as an 'option' to the new owner, nowadays due to wireless alarms they just put a fused spur in the hallway or cupboard for the alarm to connect to.
Reply Support Not support

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
1-12-2019 21:24:34 Mobile | Show all posts
The fact the second box has cut cables and terminals labelled alarm I reckon the previous owner has taken it to his new house and added the plates to tidy up the area.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部