Visonic Powerlink 3- This site can’t be reached error

Tiger55

Hello. I have now installed the Powerlink 3 in the powermaster 10 F/W:I17.133. .Its picked up by the system, it has the correct IP (192.168.1.200) through DHCP, correct gateway, and can be pinged via the network, However logging in to the ip results with a white page This site can’t be reached
192.168.1.200 refused to connect. Tried with or without port 443. Tried with or without HTTPS , any help you could give me?Thanks in Advance.

sonice1

What are you trying to do?  I don’t believe the powerlink3 lets you login via a browser.

moores211

Have a look on eBay for the visonc app, it's about 40 quid a year.

Ianandanne

Did you get sorted?

Soulistic

I'm not one for resurfacing old (er) posts, but I wanted to chime in on this conversation and provide some information. First off, I'm not an installer, but have figured out how to setup the Powerlink3 correctly.

@sonice1 is right, you can't just login the panel's IP address. This does not work with the Powerlink3. Instead, you have to configure the panel to be used by the Visonic Go app. @moores211 - you don't need to shell out £40/year. You just have to configure the panel correctly.

I've put some instructions up here. I hope it's of help.

moores211

I'll try this tomorrow - thanks

moores211

works great - thanks

dphuk

Hi, many thanks for posting this. It worked for about a week and now has randomly stopped, either my powerlink has died or something else is up, is it still working for everyone else please?

Ianandanne

Try Diagnostic in installer on broadband..

kk1992

hi. i have followed the link . but what is the user code ?