|
Okay the Emow/Mow has 5 parts.
top to bottom
Lets call them...
Drip tip, the mouthpiece
Tank, the glass/stainless section that essentially holds the liquid.
Coil, the replaceable part that screws into the base.
Base, the air vent part that connects the tank to the battery.
Battery, the long cylinder that powers the whole thing
I've never had the vent part threads get sticky, but I've not delved into caramel.custard flavours...yet.
Base
Whenever I'm filling or fiddling, I make sure the coil is screwed nicely (a good finger tight is fine) into the base, and the seals on the coil are in decent condition, I give the tank connection threads and seal a wee wipe with a piece of kitchen roll. I've never had to clean the chimney seal but I do always check that its clean.
Tank
I also wipe the tank threads after I fill him up, NB I only ever fill about 3/4 of the way up the wee column in the tank (with the tank upside down for filling). When reassembled, the tank looks about half full when it's sat the right way up.
Battery
When I'm putting it back together, or before I recharge it, I give the battery tip (the disc inside the battery connection at the top) a wee wipe, and also give the base of the coil a quick wipe.
Finally I give the tank/base joint a quick wipe after re-assembly.
Seems like a bit of a ritual, but its all helping to replace my smoking rituals.
I now have 2 Emows, and a spare tank that I swap in/out for different juices, and so far no serious leaks/smells etc. |
|