View: 554|Reply: 1

Speakon Dimensions Female Socket.

[Copy link]

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
25-11-2019 21:11:30 Mobile | Show all posts |Read mode
Hi, I am in the process of converting 2 x Bose 802 Mk2 speakers to speakon connections instead of XLR. The jack connections apparently go weak with age and so this seems a logical conversion. The example I have been following on internet is " Convert bose 802 to Speakons". In the instrs it says use a 3/4" chassis punch to enlarge the XLR holes to accept the speakons. However when I look at the spec for a Neutrik NL4MP connector in particular the machine drawings it shows the diameter of the speakon socket that would fit into the hole as 24mm which is considerably more than 3/4". I actually have a 13/16" inch punch already which I was hoping to use. So my question is " Does anybody know the size of chassis hole I would need to acommodate the Speakon connector?" Maybe  there are other manufacturers that make a copy of the NL4MP with slightly different dimensions?
Reply

Use magic Report

11610K

Threads

12810K

Posts

37310K

Credits

Administrators

Rank: 9Rank: 9Rank: 9

Credits
3732793
25-11-2019 21:11:31 Mobile | Show all posts
Just measured one of mine with accurate ( Rabone ) verniers and the hole is 0.94 inch diameter.
Hope that helps!
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | register

Points Rules

返回顶部