Installation Advice

Tony RG8

Hi, new member here!
We have refurbished our house, nearing completion and have installed shotgun cable to 13 points across 10 rooms in a radial arrangement back to the comms room.
We currently only have a terrestrial antenna on the roof and have run a feed from that to the comms room (which is temporarily patched to the one single room currently with a TV)
We will likely get a dish at some point in the future, so have future-proofed by running two pairs of shotgun to enable up to 4 x LNBs to be connected back from the dish location.
Was looking at getting one of these and attaching it to a rack tray within the cabinet.   A 19" version would be tidier, however such a thing doesn't appear to exist, hence the tray idea.
Any thoughts/ recommendations / comments gladly welcomed.

Tony RG8

no one?

Tony RG8

obviously not, I must have come to the wrong place.

RBZ5416

You may be better posting in the satellite section here.

mushii

A multiswitch will do what you want it to. You need to feed it with either a Quad or Quattro LNB. Add a terrestrial aerial input into the multiswitch and it will diplex both the satellite and UHF signal down a single cable. Hopefully you have used WF100 or CT100 twin Or Televes RG6 Twin and not RG59.